LE Monolec Syn Industrial Oil
LE Monolec® Syn Industrial Oil (9032–9150 & 9220–9460) is a versatile synthetic lubricant designed to prolong equipment life by combating high temperatures, contamination and loads that accelerate wear. It meets or exceeds the requirements of gearboxes, air compressors, vacuum pumps, hydraulic systems and roll mill bearings in the textile, plastic, rubber and paper industries. Formulated with high-viscosity 100 percent synthetic base oil and a specially developed additive package for extreme temperatures, it delivers outstanding thermal stability, rust and oxidation resistance, wear resistance and foam suppression – reducing wear, extending drain intervals, reducing oil consumption and practically eliminating deposits and sludge, with excellent seal compatibility.
GRADE COMPARISON – ISO VG 32 TO 150
| Property | 9032 | 9046 | 9068 | 9100 | 9150 |
| Color | Green | Green | Green | Green | Green |
| ISO VG / SAE Grade | 32 / – | 46 / 20 | 68 / – | 100 / 40 | 150 / 50 |
| Relative Density @ 60°F/60°F (ASTM D1298) | 0.848 | 0.852 | 0.855 | 0.858 | 0.857 |
| Viscosity @ 100°C, cSt (ASTM D445) | 6.1 | 8.1 | 10.8 | 14.9 | 20.6 |
| Viscosity @ 40°C, cSt (ASTM D445) | 32.3 | 46.8 | 68.0 | 100.0 | 152 |
| Viscosity Index (ASTM D2270) | 140 | 145 | 148 | 155 | 157 |
| Flash Point, COC (ASTM D92) | 246°C (475°F) | 249°C (480°F) | 244°C (470°F) | 243°C (470°F) | 243°C (470°F) |
| Pour Point (ASTM D97) | -57°C (-71°F) | -51°C (-60°F) | -45°C (-49°F) | -42°C (-44°F) | -39°C (-38°F) |
| Rust Test, 4 hrs @ 60°C, DI H2O (ASTM D665A) | Pass | Pass | Pass | Pass | Pass |
| Rust Test, 4 hrs @ 60°C, Sea H2O (ASTM D665B) | Pass | Pass | Pass | Pass | Pass |
| Copper Corrosion, 3 hrs @ 100°C (ASTM D130) | 1b | 1b | 1b | 1b | 1b |
| Oxidation by RPVOT @ 150°C, minutes (ASTM D2272) | 1,203 | 1,203 | 1,203 | 1,203 | 1,203 |
| Four-Ball EP Weld Point, kgf (ASTM D2783) | 200 | 200 | 200 | 200 | 200 |
| Four-Ball Wear @ 75°C, 1,200 rpm, 40 kgf, 60 min, mm (ASTM D4172) | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 |
| Ash – Sulfated, % (ASTM D874) | 0.06 | 0.06 | 0.06 | 0.08 | 0.08 |
| Acid Number, mg KOH/g (ASTM D664) | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 |
| Emulsion Characteristics @ 54°C, oil-water-emulsion/minutes (ASTM D1401) | 40-40-0/5 | 40-40-0/5 | 40-40-0/5 | 40-40-0/5 | 40-40-0/5 |
| Foaming Characteristics @ 24°C/93.5°C/24°C, ml foam/time to break (ASTM D892) | 0/0; 0/0; 0/0 | 0/0; 0/0; 0/0 | 0/0; 0/0; 0/0 | 0/0; 0/0; 0/0 | 0/0; 0/0; 0/0 |
| Evaporation, 22 hrs @ 100°C, % loss (ASTM D972) | 0.77 | 0.77 | 0.76 | 0.76 | 0.76 |
GRADE COMPARISON – ISO VG 220 TO 460
| Property | 9220 | 9320 | 9460 |
| Color | Green | Green | Green |
| ISO VG | 220 | 320 | 460 |
| Relative Density @ 60°F/60°F (ASTM D1298) | 0.864 | 0.867 | 0.868 |
| Viscosity @ 100°C, cSt (ASTM D445) | 27.0 | 36.5 | 47.6 |
| Viscosity @ 40°C, cSt (ASTM D445) | 221 | 321 | 461 |
| Viscosity Index (ASTM D2270) | 157 | 160 | 161 |
| Flash Point, COC (ASTM D92) | 243°C (470°F) | 243°C (470°F) | 241°C (465°F) |
| Pour Point (ASTM D97) | -33°C (-27°F) | -27°C (-17°F) | -24°C (-11°F) |
| Rust Test, 4 hrs @ 60°C, DI H2O (ASTM D665A) | Pass | Pass | Pass |
| Rust Test, 4 hrs @ 60°C, Sea H2O (ASTM D665B) | Pass | Pass | Pass |
| Copper Corrosion, 3 hrs @ 100°C (ASTM D130) | 1b | 1b | 1b |
| Oxidation by RPVOT @ 150°C, minutes (ASTM D2272) | 1,149 | 1,133 | 1,130 |
| Four-Ball EP Weld Point, kgf (ASTM D2783) | 200 | 200 | 200 |
| Four-Ball Wear @ 75°C, 1,200 rpm, 40 kgf, 60 min, mm (ASTM D4172) | 0.31 | 0.31 | 0.31 |
| Ash – Sulfated, % (ASTM D874) | 0.06 | 0.09 | 0.05 |
| Acid Number, mg KOH/g (ASTM D664) | 0.25 | 0.25 | 0.25 |
| Emulsion Characteristics @ 82°C, oil-water-emulsion/minutes (ASTM D1401) | 40-40-0/10 | 40-40-0/15 | 40-40-0/15 |
| Foaming Characteristics @ 24°C/93.5°C/24°C, ml foam/time to break (ASTM D892) | 0/0; 0/0; 0/0 | 0/0; 0/0; 0/0 | 0/0; 0/0; 0/0 |
KEY FEATURES
| •Increases equipment reliability, reducing replacement and repair costs |
| •Extremely high natural viscosity index; maintains viscosity in service |
| •Maintains performance in high and low temperatures |
| •Outstanding oxidation and thermal stability |
| •Controls corrosive and scuffing wear |
| •Keeps applications clean and running at peak efficiency – eliminates carbon deposits, sludge and varnish |
| •Will not harm seals and plastics |
| •Protects metal surfaces from moisture with superior rust protection |
| •Completely non-foaming in service |
| •Extends drain intervals due to outstanding oxidation resistance |
| •Requires less make-up oil due to low volatility |
| •Reduces environmental impact with less waste oil for disposal |
| •Compatible with other lubricants, making conversion easy |
APPLICATIONS
| •Air compressors (reciprocating & rotary) |
| •Bearings (oil-lubricated) |
| •Chains (including dryer chains) |
| •Gearboxes |
| •Hydraulic systems |
| •Vacuum pumps |
| •Worm gears (9460) |
| •Also suitable as a circulating oil and AGMA R & O gear oil |
ADDITIONAL INFORMATION
| Performance Requirements Met or Exceeded | AGMA 9005-D94 (OS); USDA H2 |
| Changeover Procedures | Because of its excellent cleaning action – which dissolves, loosens and removes existing deposits – all compressor and downstream parts in contact with the oil should be as clean as practical before changing over from another lubricant. Detailed changeover procedures are available upon request. |
The information contained in this data sheet is based on data considered to be accurate. No warranty is expressed or implied regarding the accuracy of this data. Product specifications and availability are subject to change without notice. Lube Control Pty Ltd accepts no responsibility for any loss or damage arising from the use of this information.
Out of stock ? / Ordering a large item?
Contact our team to confirm availability, delivery options, and customised freight costs for oversized or heavy products before placing your order.
sales@lubecontrol.com.au
1300 917 946
+61 8 8298 5563
Technical Documents
LE9032-9046-9068-9100-9150-9220-9320-9460 TDS
Download PDFDisclaimer
Product details and specifications are for reference only and subject to change without notice. Customers must independently verify all technical data and OEM approvals directly with the manufacturer prior to purchase. We accept no liability for any errors, omissions, or damages arising from reliance on this information.