Memolub HPS Visio Pump
The Memolub Visio Series is an advanced automatic single-point lubricator designed for reliable, programmable grease and oil delivery to machinery lubrication points. Available in 120cc, 240cc, and 480cc cartridge sizes — as well as a 500cc refillable oil reservoir — the Visio Series features a transparent housing for at-a-glance level monitoring and a colour-coded LED feedback system for instant status checks. The Visio Pro variant adds external PLC connectivity for fully integrated, remotely controlled lubrication in industrial automation environments.
Technical Specifications
| Ref. IDs | 6300, 6311, 6312, 6313, 6322, 6323, 1620, 6317, 6327 |
| Cartridge Sizes | 120cc (4 oz) | 240cc (8.1 oz) | 480cc (16.2 oz) | OILR-500 Refillable Oil Reservoir 500cc (16.9 oz) |
| Lubricant Compatibility | Grease & Oil (up to NLGI 2) |
| Power Source — Visio | Battery: 3 × 1.5V DC AA (4.5V DC total) |
| Power Source — Visio Pro | External supply via 6DIN M16 connector: 6–36V DC |
| PLC Connection | Visio: N/A | Visio Pro: Yes (optocoupler input/output, 24V DC signal) |
| Max. Outlet Pressure | 25 bar |
| Volume per Stroke | 0.6 cc (adjustable with stroke washers) |
| Stroke Duration | 8 seconds |
| Minimum Stroke Interval | 15 minutes |
| Dosing Periodicity (2nd Gen, Wheel 1–9) | 48 hours down to 1 hour per cycle (0.3–14.4 cc/day max. output) |
| Stroke Washer Adjustment | 0 to 6 washers + circlip; reduces output volume per cycle |
| Max. Remote Installation Distance | Single point: 8 m | Multipoint (2–8 outlets): 6 m |
| Thread Connection | BSP 1/4 (base) | BSP 1/8 (remote lube point) |
| Short Circuit Protection | Yes |
| Noise Level | Leq < 70 dB |
| Certifications | CE (2006/42/EC Machinery Directive) | UKCA | EAC (TR CU 010/2011) | WEEE compliant |
Features
| •Transparent housing for continuous visual monitoring of lubricant level without removing the unit |
| •Colour-coded LED status indicator: green (normal operation), red (motor fault / pipe clogged), yellow (abnormal temperature / pump issue), blue (low battery / empty cartridge) |
| •Advanced machine learning capability (2nd generation): automatically accounts for environmental conditions during a 20-cycle learning period to optimise lubrication accuracy |
| •10-position frequency wheel (positions 1–9 for timed dosing; position 0 for external PLC control on Visio Pro) with stroke washer fine-tuning for precise volume adjustment |
| •Visio Pro supports intermittent and continuous PLC-controlled modes with "busy" and "default" output signals for full system integration |
| •Modular two-part design (VISIO Base + VISIO Module) — base remains permanently installed at the lube point while the module is removed for easy cartridge and battery replacement |
| •Supports direct, remote (up to 8 m single point), and multipoint installation configurations with up to 8 outlets via quick-connect hose fittings |
| •Push-button check function (2nd gen) or capacitive touchpad (1st gen) for on-demand test run and status verification without interrupting machine operation |
| •Compatible with 120cc, 240cc, and 480cc lubricant cartridges as well as the OILR-500 refillable oil reservoir; cartridge lifetimes of up to 48 months achievable at low dosing settings |
Applications
| •Rolling element bearings and plain bearings requiring consistent, programmed re-lubrication intervals |
| •Electric motors, fans, pumps, and conveyor systems where manual lubrication access is difficult or hazardous |
| •Automated production lines and PLC-controlled machinery requiring synchronised lubrication (Visio Pro) |
| •Remote or hard-to-reach lubrication points where a remote installation kit with hose lines is used |
| •Multi-point lubrication applications requiring a single lubricator to service up to 8 separate lube points simultaneously |
Always install Memolub Visio Series in the upright position. Use only manufacturer-recommended lubricant cartridges and batteries. Do not open the housing — the internal spring is under load. For multipoint installations exceeding 8 outlets, contact your distributor. Incorrect installation orientation voids the warranty.
Disclaimer
Technical specifications may change. Please confirm with the manufacturer.
Out of stock?
Contact our team to confirm availability and delivery options.
sales@lubecontrol.com.au
1300 917 946
+61 8298 5563