ILC-MAX Automatic Oil Lubrication Pump With 8 Liter Reservoir Capacity, 24V DC Power Supply, Fixed Flow Rate Pumping Element, And Integrated Timer
This ILC MAX configuration is a 24V DC automatic progressive lubrication pump for oil, fitted with a fixed-flow pumping element and an 8 kg transparent plastic reservoir. Running at 22 RPM, it delivers a precise 3.52 cm³ of mineral oil per minute and achieves a maximum operating pressure of 250 bar — making it well-suited to machinery with multiple friction points when paired with DPX progressive divider valves. The integrated electronic timer is built directly into the IP56-rated housing, allowing fully automatic intermittent or continuous lubrication cycles with programmable working and pause times.
Technical Specifications
| Voltage | 24V DC |
| Motor Speed | 22 RPM |
| Pumping Element Type | Fixed flow rate |
| Discharge Rate | 0.16 cc/rev — 3.52 cm³/min total |
| Maximum Operating Pressure | 250 bar |
| Maximum Counter Pressure | 275 bar (3993 PSI) ±10% |
| Lubricant Type | Mineral oil only — 50 to 1500 cSt |
| Reservoir Capacity | 8 kg (transparent plastic) |
| Overall Height (H1) | 510.5 mm |
| Reservoir Section Height (H2) | 375 mm |
| Base Block Height (H3) | 115.5 mm |
| Pump Outlets | 1 to 3 (expandable to hundreds of points via DPX progressive divider valves) |
| Operating Temperature Range | -20 °C to +80 °C |
| Motor Protection Rating | IP56 — Nylon PA6 + 30% fibreglass housing, sealed with O-rings |
Features
| •Integrated electronic control timer built into the housing — pre-programmable working times and pause times for fully automatic intermittent or continuous lubrication cycles |
| •Expandable via DPX progressive divider valves — scales from 1 to hundreds of lubrication points from a single pump |
| •8 kg transparent plastic reservoir allows visual oil level monitoring without interrupting operation |
| •Low-level switch generates an open-to-close pulse at every revolution when the reservoir is empty — enables automatic low-level alarm integration |
| •IP56-rated motor and timer housing in reinforced Nylon PA6 + 30% fibreglass with O-ring seals — suited to harsh outdoor and industrial environments |
Oil version — mineral oil (50–1500 cSt) only. Reservoir capacity is specified by the manufacturer in kg, not litres. Manufactured by I.L.C. srl, Italy. Supplied by Lube Control Pty Ltd — call 1300 917 946 or visit lubecontrol.com.au for technical support and DPX divider valve configuration advice.
Disclaimer
Technical specifications may change. Please confirm with the manufacturer.
Out of stock?
Contact our team to confirm availability and delivery options.
sales@lubecontrol.com.au
1300 917 946
+61 8298 5563