Perma Star Control
PERMA Star Control Unit and 5m cable. Suits 60, 120 and 250, and 500cc size cartridges (cartridge not included)
The perma STAR CONTROL combines TIME and IMPULSE mode in a single system for optimal lubricant metering based on operating hours or lubrication impulse. Unlike battery-powered lubricators, the STAR CONTROL is supplied with external power via cable (9–30 V DC). Operating status can be transmitted to a PLC and evaluated on the plant error reporting system. Lubrication is precise and temperature-independent at a counter pressure up to 7.5 bar, with remote mounting possible up to 5 m.
Technical Specifications
| Type | Electromechanical drive – reusable |
| Item | Perma STAR CONTROL Drive |
| Series | Star Control |
| Power Supply | External – 9 to 30 V DC, Imax 0.5 A |
| Discharge Mode | TIME (operating hours) | IMPULSE (voltage-triggered) |
| Lubricant Volume | 60, 120, 250, 500 cm³ (2.03 / 4.06 / 8.45 / 16.91 oz) |
| Operating Temperature | –40 °C to +60 °C / –40 °F to +140 °F * |
| Maximum Operating Pressure | 7.5 bar / 109 psi |
| Protection Class | IP 65 |
| Lubricants | Greases up to NLGI 2 | Oils |
| Connection Type | Outside thread R1/4 |
| Max. Remote Mounting | 5 m |
| Dimensions – LC 60 | Ø 72 × 160 mm |
| Dimensions – LC 120 | Ø 72 × 183 mm |
| Dimensions – LC 250 | Ø 72 × 233 mm |
| Dimensions – LC 500 | Ø 72 × 329 mm |
Features
| •TIME and IMPULSE mode combined in a single system |
| •Electromechanical drive with external power supply – no battery required |
| •Operating status can be transmitted to a PLC and evaluated on the plant error reporting system |
| •LCD display with push button shows discharge settings, LC size and operating status |
| •LED visible all round signals functioning and errors |
| •Manual additional discharge via push button (purge) – clears blockages at the lubrication point |
| •PIN protects against possible tampering |
| •Pressure build-up to 7.5 bar allows remote mounting up to 5 m |
| •LC can be exchanged during running operation |
| •Mounting outside of dangerous areas increases workplace safety |
| •Drive unit is reusable |
| •Suitable for greases up to NLGI 2 and oils |
* Only use with suitable low temperature lubricants at –40 °C.
Disclaimer
Technical specifications may change. Please confirm with the manufacturer.
Out of stock?
Contact our team to confirm availability and delivery options.
sales@lubecontrol.com.au
1300 917 946
+61 8298 5563